Garage door opener receivers

These receivers are the heart and soul of the garage door opener motors, other than the circuit board or logic board. Many garage door openers have a secondary receiver attached to them. To avoid confusion look and see if there is receiver attached to the garage door motor overhead. Usually there is a wire that is hanging down from the motor. It is attached to the logic board or a secondary receiver. This will help you to tell what type of receiver you need as a replacement.

garage door receivers

Page: 1 | 2 | 3 | 4 | 5 Next » View All

Allstar MVP 3 Channel receiver 318 Mhz 110550

The Allstar MVP receiver 110550 is a 3-channel receiver capable of opening up to 3 different garage doors. The Allstar 110550 MVP receiver is compatible with Allstar Classic, Allstar MVP and Original Allstar, Allister and Pulsar .
Allstar MVP Open Close Stop Receiver 110554

Allstar MVP open close stop receiver 110554 MVP 3 channel receiver 24V 318 MHz Provides full Open, Close, Stop (OCS) functionality for one door only. Accepts up to 8 different OCS transmitter codes.
Allstar MVP receiver 1 Channel 318 Mhz 110548

Allstar MVP receiver 110548 Binary and Trinary 318 mhz receiver Works with ANY ALLSTAR PULSAR & ALLISTAR garage door opener setup. Covers dip switches and rolling code technology.

Buy Now: $39.75
Buy Now: $74.95
Buy Now: $29.50

DigiCode DC5100 300Mhz Garage Door Receiver

This receiver features an easy access hatch and simple to set, 10 position dip switch. Quick connection mounting to most garage door openers.
DigiCode DC5102 310Mhz Garage Door Receiver

This receiver features an easy access hatch and simple to set, 10 position dip switch. Quick connection mounting to most garage door openers.
DigiCode DC5110 300Mhz 12 or 24 Volt Light-Commercial Receiver

The DC5110 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.

Buy Now: $24.95
Buy Now: $24.95
Buy Now: $45.00

DigiCode DC5112 310Mhz 12 or 24 Volt Light-Commercial Receiver

The DC5112 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.
DigiCode DC5120 300Mhz 110 Volt Light-Commercial Receiver

The DC5120 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.
DigiCode DC5122 310Mhz 110 Volt Light-Commercial Receiver

The DC5112 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.

Buy Now: $45.00
Buy Now: $45.00
Buy Now: $45.00

EMX LR 650RX One Channel Long Range Receiver

EMX LR-650RX receiver has a range of up to 450 ft open air range. Up to 68 billion codes and 15 transmitters can be set to this receiver. LR-650TX 1 button 315MHz key chain remote included.
EMX LR 652RX Two Channel Long Range Receiver

EMX LR-652RX receiver has a range of up to 450 ft open air range. Up to 68 billion codes and 15 transmitters can be set to this receiver. LR-650TX 1 button 315MHz key chain remote included.
Genie Receiver GIR390 390mhz

Genie 390mhz Receiver for Genie Intellicode systems Compatible with all Genie Intellicode products, 390 Mhz frequency

Buy Now: $99.99
Buy Now: $129.99
Buy Now: $42.00

Page: 1 | 2 | 3 | 4 | 5 Next » View All

Shop By Brand


Allstar MVP 3 Channel receiver 318 Mhz 110550 The Allstar MVP receiver 110550 is a 3-channel receiver capable of opening up to 3 different garage doors. The Allstar 110550 MVP receiver is compatible with Allstar Classic, Allstar MVP and Original Allstar, Allister and Pulsar .	Allstar MVP Open Close Stop Receiver 110554 Allstar MVP open close stop receiver 110554 MVP 3 channel receiver 24V 318 MHz Provides full Open, Close, Stop (OCS) functionality for one door only. Accepts up to 8 different OCS transmitter codes.	Allstar MVP receiver 1 Channel 318 Mhz 110548 Allstar MVP receiver 110548 Binary and Trinary 318 mhz receiver Works with ANY ALLSTAR PULSAR & ALLISTAR garage door opener setup. Covers dip switches and rolling code technology.
Buy Now: $39.75	Buy Now: $74.95	Buy Now: $29.50

DigiCode DC5100 300Mhz Garage Door Receiver This receiver features an easy access hatch and simple to set, 10 position dip switch. Quick connection mounting to most garage door openers.	DigiCode DC5102 310Mhz Garage Door Receiver This receiver features an easy access hatch and simple to set, 10 position dip switch. Quick connection mounting to most garage door openers.	DigiCode DC5110 300Mhz 12 or 24 Volt Light-Commercial Receiver The DC5110 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.
Buy Now: $24.95	Buy Now: $24.95	Buy Now: $45.00

DigiCode DC5112 310Mhz 12 or 24 Volt Light-Commercial Receiver The DC5112 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.	DigiCode DC5120 300Mhz 110 Volt Light-Commercial Receiver The DC5120 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.	DigiCode DC5122 310Mhz 110 Volt Light-Commercial Receiver The DC5112 receiver is intended for use where range is possibly a problem. Pre-fitted with a type F coaxial antenna. This commercial receiver utilizes a 1024 code system that integrates perfectly with our full line of remotes.
Buy Now: $45.00	Buy Now: $45.00	Buy Now: $45.00

EMX LR 650RX One Channel Long Range Receiver EMX LR-650RX receiver has a range of up to 450 ft open air range. Up to 68 billion codes and 15 transmitters can be set to this receiver. LR-650TX 1 button 315MHz key chain remote included.	EMX LR 652RX Two Channel Long Range Receiver EMX LR-652RX receiver has a range of up to 450 ft open air range. Up to 68 billion codes and 15 transmitters can be set to this receiver. LR-650TX 1 button 315MHz key chain remote included.	Genie Receiver GIR390 390mhz Genie 390mhz Receiver for Genie Intellicode systems Compatible with all Genie Intellicode products, 390 Mhz frequency
Buy Now: $99.99	Buy Now: $129.99	Buy Now: $42.00