Linear Receiver 1 Channel Internal with Solid State Output MDRM

Help, Troubleshooting, and Instructions

Linear Help, Troubleshooting, and Instructions

Receivers Help

Linear receiver MDRM megacode

Specifically made for "Z Series" garage door openers MegaCode receivers and transmitters do not contain a typical "coding switch". Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the transmitters code into the receiver's memory. The receiver will retain the memory even without power. The receiver will activate only from these "memorized" transmitters.

Features and Specifications

• Activates one device.
• Each MegaCode receiver can remember a maximum of 10 transmitter.
• Wire lead antenna.
• Receiver is powered with 24 volts AC/DC from the garage door or gate operator.

  

  Compatible items by Linear

  • Linear ACT-21 keychain garage door opener
  • Linear ACT-22 keychain garage door opener
  • Linear Keypad megacode MDTK
  • Linear MCT-1 megacode garage door opener
  • Linear MCT-11 MegaCode 1-Channel garage door opener 318mhz
  • Linear MCT-2 megacode garage door opener
  • Linear MCT-3 MegaCode 3-Channel garage door opener 318mhz
  • Linear MDT-1 megacode garage door opener
  • Linear MDT-2 megacode garage door opener
  • Linear MGT Gate Safety Edge Transmitter
  • Linear Receiver 2 MegaCode 2 Channel MGR 318MHz
  • Linear Receiver MegaCode 1 Channel MGR 318 MHz