Linear DXS-91 glass break detector

Help, Troubleshooting, and Instructions

Linear Help, Troubleshooting, and Instructions

Linear dxs-91 glass break detector

• The Model DXS-91 Supervised Glass Break Detector Transmitter is a glass break detector with a built-in transmitter designed for use with Linear's DXS and DX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control.
  
  The digital DX code format features more than one million possible codes. Each transmitter is precoded at the factory to a unique code so no field coding is required. The DXS-91 can send three different signals: alarm, low battery and status.
  
  The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.
  
  
  • Alarm, supervisory, and low battery transmissions
  • Lithium battery powered
  • Test, operate LED
  • Shatter pro pattern recognition technology
  • DXS format
  • RF frequency: 315 MHz
  Specifications
  • Dimensions: 4.25 in W x 3.13 in H x 1.7 in D (108 x 80 x 43 mm)
  • Power: Two 3V DL-2050 lithium batteries (supplied)
  • Battery Life: 18 months
  • Measured Range: 1,000 feet, open air, with DVS-2400 control panel
  • Code Outputs: Alarm, supervisory, and low battery
  • Detection Method: Pattern recognition
  • Temperature Range: 32° to 120° F (0° to 49° C)

  Compatibles by Linear

  • Linear Receiver 4-Channel Solid State Relay DXSR-1504
  • Linear Receiver 8-Channel Solid State Relay DXSR-1508
  • Linear Receiver DXR-701 1 channel
  • Linear Receiver DXR-702 2 channel
  • Linear Security Panel DUAL-824
  • Linear Security console DVS-1200
  • Linear Security console DVS-1200 Kit Version
  • Linear Security console DVS-2400