Home > DoorKing > 6100 Continuous Duty Swing Gate Operator
DoorKing 6100 Continuous Duty Swing Gate Operator
|
|
List Price: $1,799.00
Our Price:
$1,350.00
You Save: $449.00 (24%)
|
Availability: Usually ships within 24 hours
|
|
|
 |
Help, Troubleshooting, and Instructions |
 |
DoorKing 6100 Continuous Duty Swing Gate Operator
doorking 6100-080 must ship MOTOR FREIGHT due to weight
Mechanical
1/2 HP continuous-duty motor
Maximum gate width 14-feet
Maximum gate weight 500 pounds*
Swings gate 90 degrees in approximately 10-seconds
115 VAC, 5.4 Amps
Primary Reduction: Pulley/belt driving a worm gear
Speed: Rotates gate 90° in approximately 10-12 seconds
Frame: G90 galvanized steel to prevent rusting
Arm: Articulating arms to allow mechanical slow start / slow stop
Mounting: Pad or post mount ? specify which when ordering
*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator
Manual Release
Keyed padlock provided
Clutch can be back-driven to allow fail-safe release
Safety Standards
Complies with the UL 325 and UL 991 safety standards
ETL listed
Advanced Features
Automatic limit adjustment
Auto-close timer 1-23 seconds
Gate overlap feature for bi-parting gate operation
Includes primary and built-in secondary entrapment prevention system
Tamper protect feature
Built-in On/Off switch
Built-in alarm reset switch
Operator data output for connection to companion
DKS access control system
Selectable shadow / reverse loop function
Magnetic lock output
Two 115 VAC convenience outlets for accessory transformers
Ports for plug-in open and reverse loop detectors, DKS plug-in detectors only.
Operating Temp
10ºF to 140ºF
12ºC to 62ºC
Heater kit recommended for colder environments
Shipping Weight
Approximately 100-140 lbs (45-63 kg)
Depending on model and options selected.
Warranty
5 year limited factory warranty
|